Convert a blood test result
mg/dL ↔ mmol/L, µmol/L, nmol/L — 12 common tests, both directions
Why two unit systems exist
US, Indian and many private labs report mass units — how much the substance weighs per decilitre (mg/dL, µg/mL). Most European, UK and hospital labs report SI units — how many molecules are present per litre (mmol/L, µmol/L, nmol/L). Neither is wrong; the scales are simply built on different questions.
The practical problem is comparison. A glucose of 100 mg/dL and a glucose of 5.5 mmol/L are the same result, but if you compare 100 against a European reference range of 3.9–5.5 you will conclude you are dangerously high. That single mistake — comparing across unit systems — causes more false alarm than almost anything else in lab interpretation.
Worked examples
Glucose. 100 mg/dL ÷ 18.018 = 5.55 mmol/L. Going the other way, 7.0 mmol/L × 18.018 = 126 mg/dL — the diabetes threshold in both systems.
Creatinine. 1.0 mg/dL × 88.4 = 88.4 µmol/L. Note the direction reverses: for creatinine you multiply going to SI, because the SI unit is much smaller.
Vitamin D. 30 ng/mL × 2.496 = 74.9 nmol/L. This is why the same vitamin D level looks alarming on one report and fine on another: 20 ng/mL (the usual sufficiency cut-off) is 50 nmol/L, while some guidelines quote 75 nmol/L — which is the same 30 ng/mL.
The one number people get wrong most
Rounding and reference ranges
- Round at the end, not the start. Small rounding differences compound in calculated values such as LDL.
- Ranges travel with the unit. A kidney reference of “0.6–1.2 mg/dL” becomes “53–106 µmol/L”. Never take a range from one system and apply the number from another.
- Methods differ too. Two labs reporting the same unit can still print different limits because the analyser differs. Your own report’s range always wins.
- Calculated values are not measured ones. LDL is often calculated from total cholesterol, HDL and triglycerides — which is why an unusual triglyceride changes the LDL figure.
What this converter cannot tell you
- Whether a value is normal. It converts units only; interpretation needs the range printed on your report and your clinical context.
- Which test your lab ran. Free T4 versus total T4, or 25-OH vitamin D versus 1,25-OH, are different tests with different ranges.
- Trends. A single converted value means little; three results over time mean a great deal.
| Test | Conventional | SI | Conversion |
|---|---|---|---|
| Glucose | mg/dL | mmol/L | ÷ 18.018 |
| Cholesterol (total, HDL, LDL) | mg/dL | mmol/L | ÷ 38.67 |
| Triglycerides | mg/dL | mmol/L | ÷ 88.57 |
| Creatinine | mg/dL | µmol/L | × 88.4 |
| Uric acid | mg/dL | µmol/L | × 59.48 |
| Bilirubin | mg/dL | µmol/L | × 17.1 |
| Vitamin D (25-OH) | ng/mL | nmol/L | × 2.496 |
| Vitamin B12 | pg/mL | pmol/L | × 0.738 |
| Calcium | mg/dL | mmol/L | × 0.2495 |
| Haemoglobin | g/dL | g/L | × 10 |
Three traps worth knowing
- Vitamin D. See the full vitamin D levels chart. Deficiency is quoted as under 20 ng/mL in the US and under 50 nmol/L in Europe — the same threshold. But some labs call 30 ng/mL (75 nmol/L) “sufficient”. The value has not changed; the guideline has.
- Vitamin B12. pg/mL and pmol/L look similar in magnitude but are not — 300 pg/mL is 221 pmol/L. A grey-zone B12 misread this way can flip a clinical decision.
- Triglycerides. The 88.57 factor is not the cholesterol one — our triglycerides guide explains why that gap matters.
- Creatinine. The direction reverses here; see what your creatinine means.
- HbA1c is the one test with two different scales rather than two units: NGSP % and IFCC mmol/mol. Use the A1C converter for that, not a simple factor.
Preparing for the test
- Fasting tests (glucose, triglycerides, often lipids) need 8–12 hours of water-only fasting.
- Avoid heavy exercise 24 hours before — it raises AST, CK and sometimes creatinine.
- Biotin supplements (hair and nail products) can distort thyroid and other immunoassays; stop 48–72 hours before if your doctor agrees.
- Time of day matters for testosterone and cortisol — both are read against morning ranges.
Quick answers
- Is mg/dL the same as mg/L? No — 1 mg/dL is 10 mg/L. The “dL” (decilitre) is a tenth of a litre, so the numbers differ by a factor of ten before any SI conversion. Always check which one your report prints.
- Why do I get µmol/L for creatinine in one lab and mg/dL in another? Same molecule, different unit system. One is mass per volume, the other is molecules per volume. Use the converter above — the direction reverses for creatinine, so multiply going to SI rather than divide.
- Can I convert HbA1c with these factors? No. HbA1c is reported on two completely different scales (NGSP percent and IFCC mmol/mol), not two units of the same scale. Use our A1C to average glucose converter for that.
- Does fasting change the units? No — fasting changes the value, never the unit. A fasting glucose of 92 mg/dL and a random one of 92 mg/dL are the same number with different meaning.
Sources: SI conversion factors as published in SI Unit Conversion Guide, New England Journal of Medicine / Tufts · IFCC recommendations on reporting units · WHO and ADA diagnostic thresholds. Conversion factors follow standard molecular weights for glucose (180.16), cholesterol (386.66), triglycerides (885.7) and creatinine (113.12).
Educational information only — not a diagnosis and not a substitute for medical advice. Always interpret your own numbers with a qualified clinician.
💬 Comments
Post a Comment